Measure and Plan: Measure the area you want to tile accurately. Calculate the number of tiles you’ll need and decide on the layout pattern (e.g., diagonal, herringbone, or straight). It’s a good idea to dry-fit some tiles to see how they will look and make any adjustments before applying adhesive.

Gather Materials and Tools: Purchase enough tiles for the job (plus extras for cutting and future repairs), tile adhesive, grout, spacers (if needed), a trowel, a tile cutter or wet saw, a level, a rubber mallet or tile beating block, a sponge, and a bucket for mixing grout.

• A. Mix the Adhesive: Follow the manufacturer’s instructions to mix the tile adhesive to the right consistency.
• B. Apply the Adhesive: Spread the adhesive onto the surface using the trowel. Work in small sections, as the adhesive can dry quickly.
• C. Place the Tiles: Press each tile firmly into the adhesive, using a slight twisting motion to ensure a good bond. Use tile spacers to maintain even gaps between the tiles for grouting.
• D. Cut Tiles (if needed): Use a tile cutter or wet saw to cut tiles to fit around edges, corners, or obstacles.
• E. Check for Level: Use a level to ensure the tiles are even and flat. Adjust as necessary before the adhesive dries.
• F. Repeat the Process: Continue applying adhesive and placing tiles until you’ve covered the entire area

• A. Mix the Grout: Mix the grout according to the manufacturer’s instructions. It should have a thick, paste-like consistency.
• B. Apply Grout: Use a rubber float to apply the grout over the tile surface, pressing it into the spaces between the tiles. Work at a 45-degree angle to the tiles to ensure full coverage.
• C. Remove Excess Grout: After about 15-20 minutes, wipe away excess grout from the tiles’ surface using a damp sponge. Rinse the sponge regularly.
• D. Final Cleaning: Once the grout has set (usually after 24 hours), do a final cleaning with a clean, damp sponge to remove any grout haze.